- Altera quartus ii library install#
- Altera quartus ii library drivers#
- Altera quartus ii library driver#
# The following component port is not on the entity: ** Error: (vsim-3732) C:/FpgaProjects/Q17/DE10_STD_PSD_CALC_VHDL/FloatLn.vhd(5924): No default binding for component instance 'squarer'. I am trying to calculate a natural logarithm in VHDL.Ĭompilation for my board works properly, simulation does not: Many thanks to the various tutorials online. You may need to uninstall/remove the old Ethernet interface name (in Mageia control panel or equivalent). There are several other ways to change Ethernet naming with UDEV, you may need a more subtile method than just disabling it. (or find the corresponding net setup file for your distribution) To return to the old Ethernet naming scheme, type (as root) in "/etc/udev/rules.d" With UDEV (again), Ethernet interfaces have different names, generated automatically (which is both a good and a bad thing)ĭefault udev rules are in the directory "/usr/lib/udev/rules.d/", they can be overridden in "/etc/udev/rules.d" Quartus uses the Ethernet MAC address for the license, and expects an “eth0” device.
Altera quartus ii library install#
Platform Cable USB II Altera Quartusĭownload and install version 15 with updates (no root access needed) You should get with "lsusb" Bus xxx Device xxx: ID 03fd:0008 Xilinx, Inc. WROTE: 7443 bytes, 85 segments, avg 87īut, with the UDEV file, everything is configured automatically. Write on-chip, addr 0x0bfd len 79 (0x004f) When it works, and the correct USB device is selected, you will see a long list of "write on-chip" messages, ending with : Just switch off the Xilinx hardware and type : udevadm control -reload-rulesįxload can also be tried manually at first: You generally don’t have to reboot the computer to test udev rules. Maybe it is because the USB interface on the SP605 board is somewhat special. This file may be different than the one usually found on the net. – The third line gives the rule for starting "fxload" and download the firmware.
Altera quartus ii library driver#
– The second line allows accesses to the cable driver from any user (so you don’t have to be root to run ‘impact’) – The first line allows accesses to the usb-serial interface from any user. SUBSYSTEMS="usb", ACTION="add", ATTRS="000d", RUN+="/sbin/fxload -v -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin/xusbdfwu.hex -D $tempnode" You don’t have to compile any kernel driver for the USB download cables.Ĭreate (as root) the file "les" in "/etc/udev/rules.d" with : # version 0003 You will need to create a symlink in /lib64 : "ln -s libusb-1.0.so libusb.so" (as root) You will need to install "fxload" and "libusb" The SP605 board embeds a “Platform cable USB/II” Make scripts or aliases to save a few keystrokes. To start Xilinx tools, type something like :
Altera quartus ii library drivers#
Don’t try to install the cable drivers here. Install ISE as a normal user (no root needed).
Before running "xinstall", type "unset QT_PLUGIN_PATH“.ISE is needed for Spartan 3 and 6 designs, as the SP605 board.
Most remarks here will certainly apply to many other distros.
I have just reinstalled my Linux computer and had to install both Xilinx and Altera Web edition tools.
0 kommentar(er)
